2000 PSI Water sand blaster with accessories
Wet Sandblasting Equipment Supplier in Chennai, India
Wet Sandblasting technology employed to energize or propel the blast media is an important aspect characterizing sandblasting equipment types. Nowadays, wet sandblasting by high-pressure water jet pumps has got wide acceptance in the field of surface preparation as well as in paint removal & rust removal. In wet sandblasting, an abrasive material is mixed with the water jet to create an abrasive spray. This abrasive spray is blasted on the surface, which breaks away small pieces of undesirable coating corrosion or other undesirable substances to create the desired metal finish, perfect for re coating. Wet sandblasting is widely used in engineering, heavy engineering, fabrication, construction and many other industries for different applications.
Power washers with a wet sandblaster kit are the best choice for industrial users who require powerful pressure washer water sandblasting capabilities. For even greater versatility, these power pressure washers can be used with a variety of sand grit sizes and media types like baking soda or plastic pellets. The higher the grit that is used with the machine the more abrasive the sandblasting action will be.
ADVANTAGES
- Because of the water ingredient, it will not create any environmental pollution problem caused by fluttering the micro power.
- It can remove the burrs (surface projections) & scales formed on surface and clean the surface without damaging the work piece.
- The surface finishing can access a homogeneous matte finish (spot pattern). It can contribute significantly to the finishing demand for surface roughness.
- It only applies small shot blasting effect to the surface to be finished and improve and reinforce the material of work piece.
- The foreign materials after being removed will be rinsed and flushed out by the jet of water.
- It doesn’t require any chemical during operation.
- It doesn’t affect the dimensions of the object.
LIMITATIONS
- Anti rust inhibitor is to be used after cleaning of ferrous material.
- Though water consumption is not too high, it is to be taken in to account to dispose it off or recycled.
- The surface roughness is more than dry sand blasting.
Clean and peen Precision Parts
Deglash plastic and metal Parts
Duburr Machine Parts
Paint and Rust Removal
| S.N | Model | Flow Rate in LPM (GPM) | Pressure in bar (PSI) | Motor HP |
|---|---|---|---|---|
| 1 | RP | 14 - 30 | 140 - 500 | 5 |
Riggers Pump is the leading Sand Blasting Machine Supplier in Chennai, Tamil Nadu, India for sale. Sandblasting is one of the most widely used (and perhaps abused) terms in the surface preparation industry. In many cases, sandblasting is used as a catch-all term for any process that involves shaping, preparing, or cleaning surfaces using abrasive propelled by a blast of compressed air to create the necessary pressure. Sand blasting machine is used to remove rust and corrosion from metals. This process improves the appearance of a surface and helps maintain its strength. We are the Best Sand Blasting machine Supplier in Chennai. The Sand Blasting Machine for sale is the equipment used to clean mechanical service using silicon sand which works under high pressure. This machine is commonly used to clean paint, rust, and some other kind of contaminants effectively from the metallic surface. It is essentially applied in the industries of ships, infrastructure & other wheels. This process mainly supports to prevent damage and provide result before the material is coated with a protective layer and for that this process becomes essential in all metallic structures before it undertakes to coat. There are various methods of abrasives media cleaning but Sand blasting is the strongest method among them for cleaning metal surfaces.
Wet sandblasting is a technique to remove paint and rust from steel, metal or other hard surfaces. In this procedure, abrasive material like sand is mixed with water and sprayed. Wet sandblasting is the most common sandblasting technique and is more efficient than dry sandblasting.
A wet sandblasting kit provides an alternative to traditional sandblasting. They are great at removing rust, paint, stains or any unwanted material. These kits are relatively inexpensive and very easy-to-use. Plus, they don’t create dust like a traditional sandblaster.
In wet sandblasting, an abrasive material is mixed with the water jet to create an abrasive spray. This abrasive spray is blasted on the surface, which breaks away small pieces of undesirable coating corrosion or other undesirable substances to create the desired metal finish, perfect for recoating.
- Paint removal, rust removal, corrosion removal & scale removal.
- Casting Cleaning.
- Ship hull cleaning.
- Clean & peen precision parts.
- Produce and anchor pattern ideal for uniform finishing.
- Deburr machined parts.
- Blend light scratches and tool marks.
- Deflash plastic and metal parts.
| Wet Blasting Machine for Sale in India | Model No. MA10102 |
|---|---|
| Cleaning Rate | 1 Metre to 2 Metre per minute* |
| Air Compressor Requirement | 5 HP to 7 HP |
| Max. Liquid Pressure | 2500 PSI |
| Abrasive Tank Capacity | 150 Kgs |
wet Water sandblasting equipment and systems manufacturer and supplier in Chennai, India